Customer service: +86 021-34551098 E-mail: [email protected]

搜索

language 

中国

韩国



Product

Current location:

Home

Products

Solar Hybrid Inverter

Support Paralleled Inversor Hibrido 48V a 230V 6200W Cargador Solar MPPT 120A Onda Pura Off-Grid Cargador Convertererallel function for home

Classification : Solar Hybrid Inverter

Get A Good Price

Wattage: 3.6kw,4.2kw,6.2kw
Name: High frequency inverter with built in MPPT solar charge controlller
Warranty:2 years

6.2kw Hybrid Inverter Pure Sine Wave Solar Inverter MPPT Solar Inverters

Features

1. Rated Power:6200W
2. System DC Voltage:48Vdc
3 .PV MPPT Voltage Range:85Vdc ~ 450Vdc
4. PV Max. Power:3100W*2(4000W Single-Tracker) 2 channels of input output 2 channels of full-load output
5. Operate without a battery
6 . Overload capacity: >150% for 5 seconds then shutdown, 110%-150% for 10 seconds then shutdown, <110% for continuous operation
7 . The homepage of the APP refreshes in real time
8. The function of power generation statistics
9. Single-phase/three-phase parallel operation function

Model	OHP-MAX-6.2KW
Rated Power	6200W
System DC Voltage	48Vdc
PV Specification
Max. Power	3100W*2(4000W Single-Tracker)
Max. PV Array Open Circuit Voltage	500Vdc
Nominal PV Voltage	340Vdc
Start-up Voltage	60±7V
Start Charging / Inverter Voltage	85±7V
PV MPPT Voltage Range	85Vdc ~ 450Vdc
Number of MPP Trackers	2
Max. DC Input current	16Amp*2
PV Voltage Accuracy	`+/-2V
AC Input Specification
Nominal Input Voltage	230Vac
Low Loss Voltage	170Vac±7V(UPS); 90Vac±7V(Appliances)
Low Loss Return Voltage	180Vac±7V(UPS); 100Vac±7V (Appliances)
High Loss Voltage/Return Voltage	280Vac±7V/270Vac±7V
Max AC Input Voltage	300Vac
Nominal Input Frequency	50Hz / 60Hz (Auto detection)
Low Loss Frequency/Return Frequency	40±1Hz/42±1Hz
High Loss Frequency/Return Frequency	65±1Hz/63±1Hz
Max. AC Input Current	27Amp
Rating of Transfer Relay	40Amp
Battery Mode Specification
Waveform	Pure Sine Wave
Nominal Output Voltage	230Vac
Nominal Output Frequency	50/60Hz auto sensing
Output Voltage Distortion	<3% for linear load, <5% for non-linear load @ V nominal
Output DC offset	<150mV
Peak Efficiency	93%
No Load Power Consumption	<70W
Transfer Time	10ms typical 20ms MAX @Single\|<30ms @ Parallel
Output Parallelled	Maximum 6 units for single-phase, maximum 2 groups for three-phase.
TWO LOAD OUTPUT POWER
Full Load	6200W
Maximum Main Load	6200W
Maximum Second Load(battery mode)	6200W
Overload Capability Specification
Line Mode	Breaker, short-circuits
Battery Mode	5sec, @>150% Load
	10sec, @110%~150%
	4-cycle, short-circuits
Battery & Charger Specification
Nominal DC Voltage	48Vdc
Cold Start SOC(Li Mode)	Default 30% ,Low DC Cut-off SOC +10%
Cold Start Voltage(Lead-Acid Mode)	46.0Vdc
Low DC Warning Voltage(Lead-Acid Mode)
@ load < 20% \| @20%<load <50%\| @load > 50%	44.0Vdc \| 42.8Vdc\|40.4Vdc
Low DC Warning Recovery Voltage(Lead-Acid Mode)
@ load < 20% \| @20%<load <50%\| @load > 50%	46.0Vdc \| 44.8Vdc\|42.4Vdc
Low DC Cut-off Voltage(Lead-Acid Mode)
@ load < 20% \| @20%<load <50%\| @load > 50%	42.0Vdc \| 40.8Vdc\|38.4Vdc
Low DC Cut-off Voltage(Li Mode)	42Vdc
Low DC Warning SOC (Li Mode)	Low DC Cut-off SOC -5%
Low DC Warning Return SOC (Li Mode)	Low DC Cut-off SOC +10%
Low DC Cut-off SOC (Li Mode)	Default 20% ,5%-50% Settable
High DC Cut-off Voltage	60.8Vdc
Max. AC Charging Current	80Amp
Max. Solar Charging Current	100Amp
Max. Charging Current	100Amp
Absorption Charging Voltage	56.4Vdc(C.V Charger Voltage)
Floating Charging Voltage	54.0Vdc
Communications
Dry-Contact Signal	Activated when battery lower than pre-alarm level
WiFi/RS485&CAN-BUS port for BMS	Standard
Environmental
Operation Temperature Range	0ºC to 55ºC
Relative Humidity	5% to 95% Relative Humidity (Non-condensing)
Altitude	<2000m
Cooling	Forced Air
Warranty	24-Month Non-Human-Induced Warranty
Certification	CE/ROHS/ISO9001/ISO14001/ISO45001
Mechanical Specification
Housing Dimension (LWH), mm	450x417x132
Net Weight, kg	12