Car power inverter pure sine wave 2000w 24V 220V solar power inverter
Input voltage: DC12V/24V/48V
Output voltage: AC 110V/220V
Warranty: 2 years
Precautions for the use of car power inverter pure sine wave 2000w 24V 220V solar power inverter:
1. Use the pure sine wave inverter strictly in accordance with the provisions of the user manual;
2. Secondly, the output voltage of the inverter is 220 volts AC, and this 220 volts is in a small space and in a movable state, so be extra careful. It should be kept in a safe place (especially away from children!) to prevent electric shock. When not in use, it is best to cut off its input power.
3. The ambient temperature of the power inverter is not easy to be less than 40℃. Do not place too many things around the inverter when it is working. In summer, do ventilation and heat dissipation. Do not place the inverter in direct sunlight or near the outlet of the heater. In rainy days, also pay attention to rainproof and waterproof.
4. The DC voltage should be consistent
Each inverter has access to DC voltage values, such as 12V, 24V, etc., and it is required that the selected battery voltage must be consistent with the DC input voltage of the inverter. For example, a 12V inverter must select a 12V battery.
5. The output power of the inverter must be greater than the power used by the electrical appliances, especially for electrical appliances with high power at startup, such as refrigerators and air conditioners, a larger margin should be left.
6. The positive and negative poles must be connected correctly
The DC voltage connected to the solar power inverter is marked with positive and negative poles. Red is positive (+), black is negative (-), the battery is also marked with positive and negative, red is positive (+), black is negative (-), must be connected to positive (red to red), negative Negative (black to black). The diameter of the connecting wire must be thick enough, and the length of the connecting wire should be minimized.
7. Charging and inverter cannot be performed at the same time. That is, the charging plug cannot be inserted into the electrical circuit of the inverter output during the inverter.
8. The interval between two startups is not less than 5 seconds (cut off the input power).
9. Please wipe with dry cloth or anti-static cloth to keep the machine clean.
10. Before connecting the input and output of the machine, please ground the casing of the machine correctly.
11. In order to avoid accidents, users are strictly prohibited to open the case for operation and use.
12. When you suspect that the machine is faulty, please do not continue to operate and use it, you should cut off the input and output in time, and check and maintain it by qualified maintenance personnel or maintenance units.
13. When connecting the battery, make sure that there are no other metal objects on your hands, so as to avoid short circuit of the battery and burn the human body.
|Output Frequency||50Hz±0.5Hz or 60Hz±0.5Hz|
|Output waveform||Pure sine wave|
|Output voltage||100V/110v/120v or 220v/230v/240v|
|Unload current less than||1.1A||0.7A||0.5A|
|Input voltage range||10-15.5V||20-31V||40-61V|
|Low voltage warning||10.5±0.5V||21±0.5V||42±1V|
|Low voltage protection||10±0.5V||20±0.5V||40±15V|
|Over voltage protection||15.5±0.5V||31±0.5V||61±1V|
|Low voltage Restoring||13±0.5V||24±0.5V||48±1V|
|Over voltage Restoring||14.8V±0.5V||29.5V±0.5V||59V±1V|
|Over heat protection||80℃|
|Waveform distortion||Less than 3%|
|USB port||5v 2.1A|
|Working temperature||-0°- +40°|
|Storage temperature||-10°- +70°|
|Shell material||Aluminium alloy|
|Display||LCD display( optional)|
|Cooling mode||Intelligent Cooling Fan|
|Starting method||soft starting|
|Remote control||wirless remote control/wired remote control (optional)|
|Product size/Packaging size||350*175*90mm/420*240*165mm|
|Protection function phenomena||Low voltage||Alarm at first, voltage continously reduce. LED Red light on & shut down.|
|Over voltage||LED Red light on, shut down|
|Over load||LED Red light on, shut down|
|Over temperature||Alarm at first, tempurature continously rise.LED Red light on & shut sown|
|Short circuit||LED Red light on|
|Input reverse polarity||Fuse burn-out|
Your valuable opinions are the driving force for us to move forward
Skype: [email protected]
Skype: [email protected]
Copyright © Wuhan Guanyou New Energy Technology Co., Ltd. 鄂ICP备2021019922号 Power by:www.300.cn
Get A Good Price
Get In Touch with Us
Products Get A Good Price