Customer service: +86 021-34551098 E-mail: [email protected]
About Us
Introduction to the use of 24V 220V solar power inverter
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2023-02-08
- Views:0
(Summary description)The manufacturer of 24V 220V solar power inverter tells you that the on-off of power electronic switching devices requires certain driving pulses. These pulses may be adjusted by changing a voltage signal. The circuit that generates and regulates pulses is usually called a control circuit or a control loop.
Introduction to the use of 24V 220V solar power inverter
(Summary description)The manufacturer of 24V 220V solar power inverter tells you that the on-off of power electronic switching devices requires certain driving pulses. These pulses may be adjusted by changing a voltage signal. The circuit that generates and regulates pulses is usually called a control circuit or a control loop.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2023-02-08
- Views:0
The manufacturer of 24V 220V solar power inverter tells you that the on-off of power electronic switching devices requires certain driving pulses. These pulses may be adjusted by changing a voltage signal. The circuit that generates and regulates pulses is usually called a control circuit or a control loop. In addition to the above-mentioned inverter circuit and control circuit, the basic structure of the inverter device also includes a protection circuit, an output circuit, an input circuit, and an auxiliary circuit.
Use of 24V 220V solar power inverter:
1. Connect and install the equipment in strict accordance with the requirements of the inverter maintenance manual. The manufacturer of 24V 220V solar power inverter tells you that during installation, you should carefully check whether the wire diameter meets the requirements, whether the components and terminals are loose during transportation, whether the insulation should be well insulated, and whether the grounding of the system meets the regulations.
2. It should be operated and used in strict accordance with the provisions of the inverter operation and maintenance manual. The manufacturer of 24V 220V solar power inverter tells you to pay attention to whether the input voltage is normal especially before starting up the inverter. During operation, pay attention to whether the sequence of switching on and off is correct, and whether the indications of the meters and indicators are normal.
3. Inverters generally have automatic protection for open circuit, overcurrent, overvoltage, overheating and other items, so when these phenomena occur, there is no need to manually stop them. The protection point of automatic protection is generally set at the factory, and no further adjustment is required.
4. There is high voltage inside the inverter cabinet, the operator is generally not allowed to open the cabinet door, and the cabinet door should be locked at ordinary times.
5. The manufacturer of 24V 220V solar power inverter tells you that when the room temperature exceeds 30°C, heat dissipation and cooling measures should be taken to prevent equipment failure and prolong the service life of the equipment.
Scan the QR code to read on your phone
Relevant news
Contact us
Address: Building 22, No. 11 Jiutong Road, Cihui Office of Dongxihu District, Wuhan, China
Copyright © Wuhan Guanyou New Energy Technology Co., Ltd. 鄂ICP备2021019922号 Power by:www.300.cn
Get A Good Price
首页留言板块
Get In Touch with Us
右侧漂浮在线客服
Products Get A Good Price
产品详情页留言